Construction Updates

Sign up to receive weekly emails of the latest construction updates.

Construction crews have begun utility and roadway work on Mountain View Corridor.  See below for specific construction activities on cross streets. New activities are highlighted in bold.  

4700 South

Beginning May 14, 2012* crews will begin a hauling operation across 4700 South at approximately 6000 West.  Flaggers will be in place to guide large trucks across the roadway.  Please use caution when driving through this area.

Beginning May 14, 2012* 6000 West will be temporarily closed at the intersection of 4700 South.  This closure will be in place to allow crews to realign the roadway to tie into 4700 South.  This closure is expected to last until June 30*.  Detours will be in place to allow traffic to get around the construction area by using 6400 West and 4100 South.  Please plan your travel accordingly

5400 South

Traffic on 5400 South has been shifted to the south side of the roadway at approximately 6400 West where it intersects with the  Mountain View Corridor.  Crews have placed temporary pavement  on  the south side of the roadway to accommodate this shift.  This traffic shift is in place to allow crews to reconstruct the north side of 5400 South to tie-in to the Mountain View Corridor.  Please use caution and obey posted speed limits as you drive through this area.

Crews have closed Upper Ridge Road temporarily at approximately 5100 South.  This closure is in place so crews can haul dirt across the roadway to build up the future Mountain View Corridor.  Upper Ridge Road is expected to be closed until May 15, 2012*.  Please adjust your travel accordingly.

Beginning in mid-May 2012* crews will close 6400 West at 5400 South.  This closure will be in place to allow crews to reconstruct the north side of 5400 South to tie-in to the Mountain View Corridor.  Access to the north portion of 6400 West will be available from Upper Ridge Road.  This closure will not be in place until Upper Ridge Road is reopened to traffic.  Please plan your travel accordingly.

6200 South

Crews have temporarily closed 6200 South at approximately 6300 West where it will connect to the Mountain View Corridor.  Crews are reconstructing the roadway to tie-in to the Mountain View Corridor.  To accommodate the reconstruction, access to High Bluff Drive has been restricted.  A detour route has been created to access High Bluff Drive by turning at Laurel Canyon Drive and then at Mt. Montana Drive.  Click here to view a map of the detour route.  Please adjust your travel accordingly.

7800 South

Traffic on 7800 South has been shifted to the south side of the roadway at approximately 5900 West where it intersects with the Mountain View Corridor.  Crews have placed temporary pavement on the south side of the roadway to accommodate this shift.  The traffic shift will be in place to allow crews to reconstruct the north side of 7800 South to tie-in to the Mountain View Corridor.  Please use caution and obey posted speed limits as you drive through this area.

8200 South

Intermittent lane restrictions will be in place on 8200 South at  approximately 5800 West where it crosses the Mountain View Corridor.   Crews will be installing concrete deck panels and placing the concrete  deck on the bridges.  Flaggers will be in place to guide vehicles  through the construction area.  These lane restrictions are expected to  take place from mid-March into mid-May 2012*.  Shoulder restrictions  will remain in place throughout the construction of the bridges over 8200 South.  Please use caution when driving through this area  and obey posted speed limits.

New Bingham Highway

Crews have shifted traffic to the south side of the roadway on New Bingham Highway at approximately 5100 West to 5600 West.  This traffic shift is in place to allow crews to connect the new portion of 8600 South to New Bingham Highway.  Left hand turn lanes will be installed to access Copper Hills High School.  This traffic shift is expected to be in place until late June*.  Please use caution as you drive through this area.

Crews have realigned New Bingham Highway at approximately 5800 West where it intersects with the Mountain View Corridor.  A new intersection is under construction at 5600 west and New Bingham  Highway.  This intersection will allow better traffic flow to access 9000 South and the west portion of New Bingham Highway.  Click here to view driving directions and a map of the new alignment. 

9000 South

A new portion of 9000 South has been opened to traffic.  New Bingham Highway has been realigned to connect to this new portion of 9000 South at approximately 6100 West.  This new section of 9000 South can be used to access New Bingham Highway via 5600 West.  Click here to view driving directions and a map of the new roadway.   

Crews have shifted traffic from the east side of 5600 West to the new pavement on the west side of 5600 West.  This will allow crews to reconstruct the east side of the roadway.  Additional traffic shifts will occur to allow crews to reconstruct the intersections at 5600 West and New Bingham Highway and 5600 West and 9000 South.  Striping and signs will be in place to help guide vehicles through this area.  Please use caution as you drive through the construction zone.

Dannon Way

Intermittent lane restrictions will be in place on Dannon Way at approximately 5800 West where it crosses the Mountain View Corridor.  Crews will be installing concrete deck panels and placing the concrete deck on the bridges.  Flaggers will be in place to guide vehicles through the construction area.  These lane restrictions are expected to take place from mid-March into late May 2012*.  Shoulder Restrictions will remain in place throughout the construction of the bridges over Dannon Way.  Please use caution when driving through this area and obey posted speed limits.

Wells Park Road

Wells Park Road is now closed permanently at approximately 6000 West where it intersects with Mountain View Corridor.  Cul-de-sacs will be built on each side of the Mountain View Corridor to accommodate the dead end.  Please adjust your travel accordingly.

Old Bingham Highway

Crews have temporarily closed Old Bingham Highway at approximately 5700 West where it intersects with the Mountain View Corridor.  This closure will allow crews to reconstruct the roadway to tie-in to the Mountain View Corridor.  This closure will be in place until late June 2012*.  Detour routes are available by using 5600 West to Dannon Way to Prosperity Road.  Click here to view a map of the detour route.  Please adjust your travel accordingly.

Daybreak Parkway

Traffic on Daybreak Parkway been shifted to the north side of the roadway at approximately 4700 West where it intersects with the Mountain View Corridor.  Crews have completed the connection to the Mountain View Corridor on the north side of the roadway.  This traffic shift will be in place to allow crews to reconstruct the south side of Daybreak Parkway to tie-in to the Mountain View Corridor.  Please use caution and obey posted speed limits as you drive through this area.

11800 South

Crews have temporarily closed Vadania Drive from Digory Drive to 11800 South.  This closure is in place so crews can connect Vadania Drive to the new alignment of 11800 South.  Detour routes are available at Grandville Avenue to Currant Drive or Daybreak Parkway to Vadania Drive.  Click here to view a map of the detour routes.  This closure is expected to be in place until August 2012*.  Please use caution and plan your travel accordingly.

11800 South is now closed at approximately 5200 West between Daybreak Parkway and Vadania Drive. This is a permanent closure of the existing alignment of 11800 South from Daybreak Parkway to Vadania Drive. Construction crews will realign 11800 South to its new location where it will connect to Mountain View Corridor. 11800 South to the east and to the west of Mountain View Corridor remains  open. Alternate  Routes are available through 4000 West and Grandville Avenue for traffic to access Daybreak Parkway. This includes pedestrian traffic. During construction, concrete barrier will be placed on each side of the closure to prevent vehicle and pedestrian access into the construction zone.

12600 South
Traffic lanes are now shifted on 12600 South at approximately 4700 West where Mountain View Corridor intersects with 12600 South. This change has shifted traffic to the outside of the roadway  (two lanes on the north side and two lanes on the south side). This traffic shift will allow crews to install the final raised concrete median in the middle of the road.  Sidewalks have been completed on the south side of the roadway for pedestrian access. Please stay on the designated sidewalks to walk or ride your bike through the construction zone.

Segment Open

Beginning June 2, 2012* a segment of the Mountain View Corridor will be opening to traffic.  The segment from Rose Crest Road to 12600 South will be ready for use.  The project team will be hosting an opening event at Foothills Park and on the new roadway adjacent to the park.  Details of the event will be provided soon.  Pedestrian access will be limited until crews complete the sidewalks and trails in the area.  Please do not attempt to drive on the new section of roadway until the opening date, it is still an active construction zone and is not safe for the public. Click here to view a video of how to navigate the new roadway.

 13400 South
Traffic is now restricted to one lane in each direction. This traffic restriction is in place to reconstruct and widen the roadway between Bangerter Highway and Mountain View Corridor. This project is not affiliated with the Mountain View Corridor.  For more information regarding the widening of 13400 South please call  888-556-0232. Click here  to find information on the 134th Widening Website.

Redwood Road
Lane shifts are now in place in the southbound lanes where Porter Rockwell Boulevard connects to Redwood Road.  New striping is in place to direct you through the construction area. All traffic lanes will remain open. Please use caution as you drive through this area and obey posted speed limits. 

*Dates subject to change due to weather or equipment related issues.

Crews will also be working along the corridor between 16000 South and 5400 South installing utilities, performing earthwork operations, and working on structures.